oscilent corporation product specification oscilent corporation telephone: 1.949.252.0522 fax: 1.949.252.0522 email: sales@oscilent.com product specification www.oscilent.com rev a january 2011 oscilent controlled document ordering code / part number product description 813-if70.0m-26b 70mhz if saw filter 25.76mhz bandwidth specification contents o mechanical dimensions o test circuit o maximum ratings o electrical specification o frequency response o smith chart o vswr notes o electrostatic sensitive device (esd) o avoid excessive ultrasonic exposure o solderability compatible with jedec j-std-020c pb-free process, 260c peak reflow temperature o this product complies with eu dire ctive 2002/95/ec (rohs compliance)
oscilent part number 813-if70.0m-26b january 2011 rev a 70mhz if saw filter 25.76mhz bandwidth product specification p. 1 www.oscilent.com mechanical dimensions (mm) test circuit pin description a, b, c, d, f, g, h, i, j, l ground k input e output test fixture & values input l1 = 180 nh, c1=16pf output l2 = 180 nh source/load impedance 50 ?
oscilent part number 813-if70.0m-26b january 2011 rev a 70mhz if saw filter 25.76mhz bandwidth product specification p. 2 www.oscilent.com maximum ratings parameters description unit minimum typical maximum operating temperature range c -10 - 70 storage temperature range c -40 - 85 maximum dc voltage v - - 10 maximum input power dbm - - 10 source impedance (single ended) (1) ? - 50 - load impedance (single ended) (1) ? - 50 - notes: with matching network (ref. test ing environment circ uit as shown above). those impedances could be modified wi th different impedance values and/or structures, if necessary. electrical specification parameters description unit minimum typical maximum center frequency (fo) mhz - 70.0 - insertion loss at fo db - 31.1 32.5 group delay variation (fo12.48mhz) ns - 26 50 absolute delay time at fo us - 1.51 - temperature coefficient ppm/ c - -72 - amplitude ripple (fo12.48mhz) db - 0.63 1.00 bandwidth at -1db mhz 25.60 25.76 - bandwidth at -3db mhz - 26.33 - bandwidth at -40db mhz - 28.74 28.90 ultimate rejection db 42 47 -
oscilent part number 813-if70.0m-26b january 2011 rev a 70mhz if saw filter 25.76mhz bandwidth product specification p. 3 www.oscilent.com frequency response bandwidth at ?1.0 db bandwidth at ?3.0 db bandwidth at ?40.0 db wide band
oscilent part number 813-if70.0m-26b january 2011 rev a 70mhz if saw filter 25.76mhz bandwidth product specification p. 4 www.oscilent.com ripple variation fo12.48mhz group delay variation fo12.48mhz smith chart
oscilent part number 813-if70.0m-26b january 2011 rev a 70mhz if saw filter 25.76mhz bandwidth product specification p. 5 www.oscilent.com vswr
|